06

2023

-

01

Rolling parts manufacturers talk about how to solve the abnormal sound of the guide rail of the glass regulator?


  Rolling parts manufacturers talk about how to solve the abnormal sound of the guide rail of the glass regulator?

  Roller parts manufacturer: How to solve the abnormal noise of the guide rail of the glass regulator?

  During the use of the glass regulator guide rail, there is abnormal sound, which should be noticed. The main reason is that the screw is loose, or the parts are too dirty and need to be lubricated. After cleaning the guide rail, lubricate the guide rail to improve the guide rail. In order to let more people know, The following rolling parts manufacturers will talk about it in detail.

  In use, if such parts are faulty, such as cables, guide rails, sliders, etc., these parts are damaged, and generally only the glass regulator assembly can be replaced, and a single part can rarely be replaced.

  If there is abnormal noise, you can go to a repair shop or a beauty shop. Of course, the master can also choose DIY, remove the inner panel of the door, lubricate the glass regulator bracket, track, and steel wire with grease, and then install it in place to eliminate the abnormal noise.

Roller parts manufacturers

  Reasons for lifting and lowering 1. The aging, dirt and deformation of the glass ribbon (including inner curling) will form resistance to the lifting of the glass. Generally, aging, deformation, etc., if the sealing strip is too dirty, you can replace it with a new one and clean it directly. Spraying wax on the sealing strip, or applying talc powder (for lubrication), generally has a good effect.

  Rolling parts manufacturers talk about why the guide rails of the glass regulator wear out?

  The application of the glass regulator guide rail has played an important role. It is a kind of car door and window glass lifting device. It is mainly divided into two categories: electric glass regulator and manual glass regulator. Now many car doors and windows are manually lifted (closed and opened) , It is no longer a crank type, but generally changed to a button type, that is, using an electric window regulator. The car electric window regulator is mainly composed of a motor, a reel, a cable, a guide rail and a glass mounting bracket.

  In essence, the friction of the connecting surface of the guide rail of the automotive window regulator is inevitable during the relative sliding process, and reasonable wear is normal, but when the friction force greatly exceeds the intermolecular bonding force, a large amount of metal will fall off from the base rail, cause excessive wear.

  During the relative sliding process of the device, due to insufficient supply of lubricating oil or blockage of the lubricating oil pipe, no oil film can be formed between the friction surfaces, resulting in short-term dry friction and wear.

  During the relative sliding process of the sliding surface of the guide rail of the glass regulator, due to insufficient dust-proof devices on the guide rail or dirty lubricating oil, hard objects or small iron filings enter the sliding surface, so these small hard objects or small iron filings will act as abrasive tools , resulting in uneven surface wear, resulting in galling and strain, which is very common.

  The above is the content explained by the editor of the rolling parts manufacturer. I hope it will be helpful to everyone. Thank you for watching, and we will see you in the next issue.